USB and Artnet interface to control pixels of LED strips, LED stripes, and LED tape
- MADRIX NEBULA is a hardware interface to control your digital LED strips, LED stripes, and LED tape
- Additional LED types will be supported with future firmware updates
- Drives up to 1360 RGB pixels (8 DMX universes / 4096 DMX Channels / 4096 single-color pixels / 1024 RGBW pixels) distributed equally over 2 ports
- Supports a signal frequency of up to 24 MHz
- The output protocol can be set separately for each of the 2 ports
- Directly connects to the LEDs via 4-pin, pluggable screw terminals
- Provides flexible power options: over USB (5 V) or via screw terminal (5 V to 24 V) as well as routing through to LEDs with up to 6 A maximum load per port with various options on how to connect LEDs, power, and MADRIX NEBULA
- Receives data over Ethernet network (Art-Net and/or Streaming ACN)
- Can also be used as MADRIX USB interface
- Works great with the MADRIX Software with quick and easy installation (sold separately)
- Sync Mode: MADRIX Software and hardware allow you to synchronize Art-Net data for all output ports and even across multiple devices to get an optimal image on the LEDs without visual interruptions
- Complies with the official specifications of Art-Net and Streaming ACN and can be used as regular network unit with other 3rd-party consoles, controllers, or software solutions
- Automatic HTP merging for two Ethernet sources
- 2 Ethernet ports with daisy-chain support for the data connection without using a separate network switch or router
- Useful settings for channels per universe, channel offset, channel order, and output in case of network connection loss, and more
- 9 status LEDs, which can be turned off
- Built-in web page for simple on-device configuration
- Can be mounted on 35-mm DIN rails or walls via the provided wall-mount brackets
- Ready within seconds after startup
- Recommended for any small or large project
- Multiple devices can be used together without problems
- The firmware can be updated for future features and enhancements
- Quick start guide / technical manual available in English and German
- User manuals also available at help.madrix.com
- More information available at www.madrix.com
- Can transmit up to 4096 DMX channels
- The device is cooled by passive convection cooling
- Made in Germany
- For further information about this product, please refer to the Data Sheet under ""Downloads""
| Power supply: | 5-24 V DC |
| IP classification: | IP20 |
| Power connection: | Mains input via USB, type B power supply cord for USB A mains connection (provided) |
| DMX channels: | Output 4096 |
| Cooling: | Passive convection cooling |
| USB port: | USB 2.0, Typ B |
| Dimensions: | Width: 7 cm
Depth: 9,2 cm
Height: 4,5 cm |
| Weight: | 270 g |
+34 944 71 05 00
