The Z-350 is stemming from years of experience in Fazer development. The adoption of the air pump technology not only enables the Z-350 to generate dry haze but also provides its heater with a self-cleaning function. The Z-350 comes with a larger tube of one diameter, which substantially reduces the risk of heater clogging.An extremely low fluid consumption rate grants a full tank (1.3 liters) of the Z-350 to produce more than 7 hours of non-stop hazing at maximum output.The new on-board DMX interface allows users smarter control of the Z-350: When a DMX signal is received, the machine powers up and starts heating up automatically. When the DMX signal is off, it automatically begins the self-cleaning process and then goes into Sleep mode.The machine weighs only 8.7 kg. Being so light and compact allows the Z-350 to be transported and setup anywhere-whenever needed.
Extremely efficient fazer with DMX interface
- Extremely low fluid consumption rate grants a full tank to produce more than 7 hours of non-stop hazing at maximum output
- Produces fine, translucent haze without nebulizing the room at the same time
- Ideal for accentuating light and laser beams
- Combines the reliability of a fog machine with the extremely silent operation of a haze machine
- Fan speed and output volume variably adjustable via onboard controls
- Self-cleaning function
- Fluid level indication
- Operates on standard water-based fluid
- Vertical and horizontal installation possible
- Intelligent DMX functions: when a DMX signal is received, the unit turns on and starts heating up automatically, when the DMX signal is off, it starts the self-cleaning process and then goes into standby mode
- Z-3 cable remote control available as accessory
- Short warm-up time
- Can be operated in 2 CH mode
- Controlling by wired remote control (optional)"; stand-alone; DMX
Package contents
- 1 x device, 1 x user manual, 1 x power cord
| Power supply: | 230 V AC, 50 Hz |
| Power consumption: | 690 W |
| IP classification: | IP20 |
| Power connection: | Mains input via IEC connector (M) mounting version power supply cord with safety plug (provided) |
| Warm-up time: | Approx. 4 min |
| Output volume: | Approx. 85 m³/min |
| Operating time: | Max. 7 h 30 min. |
| Tank capacity: | 1,3 l |
| Fluid consumption: | Approx. 3 ml/min |
| DMX channels: | 2 |
| DMX input: | 1 x 3-pin XLR (M) mounting version |
| DMX output: | 1 x 3-pin XLR (F) mounting version |
| Control: | Wired remote control (optional); stand-alone;" DMX |
| Housing color: | Grey |
| Heater: | 800 W |
| Color: | Grey |
| Dimensions: | Width: 32 cm
Depth: 15 cm
Height: 39 cm |
| Weight: | 8,80 kg |
+34 944 71 05 00
